Terpmax Bloom 3 Part Feed

£20.95 - £56.95
Write a Review
Availability:
usually ships in 24 hours
Weight:
1.00 KGS
Price per Litre:
100l £0.21 | 500l £0.07 | 1000l £0.05
Suitable For::
Hydroponics | Coir | Soil
NPK:
4.5-4.5-9

TERPMAX BLOOM 4.5-4.5-9

For a precise tailored guide > PRINTABLE FEED CHART 

TerpMaX

A 3 component, highly soluble, powdered feed for producing heavy blooms, and maximum terpene production.
packaged in convenient portions for adding directly to reservoirs of 100, 500 or 1000 Litres E.C of 1.4

  • Highly Soluble
  • PH Stable
  • Suitable for all types of hydroponics
  • Hard or soft water*
  • *Use with CalMag in softwater systems
  • Use PEAK  bloom booster during weeks 4,5 and 6 of bloom for maximum yields.

    Get professional results with the minimum effort, Eco friendly,70% less shipping weight, compared to liquid nutrients!

Ingredients

  • Nitrogen 4.5%
  • Phosphorous 4.5% (5.5% with PEAK)
  • Potassium 9% (10% with PEAK)
  • Calcium 5.5%
  • Magnesium 2.3%
  • Sulphur X%
  • Iron 0.9%
  • molybdenum 0.04%
  • copper 0.005%
  • zinc 0.07%
  • boron 0.01%

Usage Guide

Simply purchase the correct sized pack sized to match your reservoir, 100,500,1000Litres x the amount of reservoir changes per cycle.
Add directly to your reservoir while mixing or filling.

Add part1, then part2,then 3. mixing well between each addition.

*SOFTWATER GROWERS SHOULD ALSO USE CAL/Mag to achieve optimum Calcium & Magnesium Levels
Use PEAK  bloom booster during weeks 4,5 and 6 of bloom for maximum yields.

General Dosage Guide
FOR BOTH SOFT WATER* OR HARD WATER, USE (Litres and US Gallons)
0.35g/1L | 1.33g/1Gal | 3.5g/10L | 13.3g/10Gal | 35g/100L | 133g/100Gal

Stock Solutions

For Dosatron, intellidose auto dose systems, you will need to make a concentrated stock solutions, we recommend the following recipe for dosing system tanks:

  • Add 35g/ L of water for a stock solution.  

    To achieve an EC of 1.4 (980ppm) you will need to add 10ml of stock solution per Litre of water in your reservoir

  • Add 133g/Gallon of water for a stock solution. 
     
    To achieve an EC of 1.4 (980ppm) you will need to add 38ml of stock solution per Gallon of water in your reservoir
Above guide is for both hard and soft water feeds but CalMag is required additionally in soft water or add a double dose in RO (reverse osmosis) systems
 
  • For soft water stock solutions add the Calmag to your Terpmax 3, stock tank @ 10g/L of stock solution or 20g/L for reverse osmosis filtered water systems.
 
  • For soft water stock solutons add the PEAK to your Terpmax Bloom 2 stock tank @ 10g/L of stock solution for weeks 4,5 and 6 of bloom.
 


 
Nitrogen %
Phosphorous %
Potassium %
Calcium %
Magnesium % Boron Molybdenum